To convert m³/h to CFM, multiply by 0.588578, or divide by 1.69901. 1,000 m³/h is 588.6 CFM. m³/h, m³/hr, m3/hr and CMH all mean cubic metres per hour, so the same factor converts each of them. Convert like for like: a standard (SCFM) figure goes to standard m³/h, an actual one to actual m³/h.
Enter a value to convert
m³/h to CFM conversion resultFree download
Schedule 40 pipe sizes, water flow in GPM and LPM at four design velocities, and recommended velocities by application. One PDF, made to pin above the bench.
m³/h is the usual airflow unit in European fan catalogues, ventilation data and heat recovery unit specifications. CFM is the unit on US fans, air handling units and duct sizing charts. One cubic metre is 35.3147 cubic feet and an hour is 60 minutes, so 1 m³/h = 35.3147 ÷ 60 = 0.588578 CFM. The factor is fixed and does not depend on temperature or pressure, provided both figures are quoted at the same conditions.
CFM = m³/h × 0.588578
Going the other way, one CFM equals 1.69901 m³/h. Use it to compare a metric fan, extract or ventilation rate with US equipment rated in CFM.
A heat recovery unit set to 150 m³/h:
150 × 0.588578 = 88.2867 CFM
An air handling unit rated at 5,000 m³/h:
5,000 × 0.588578 = 2,942.89 CFM
| m³/h (CMH) | CFM |
|---|---|
| 1 m³/h | 0.588578 CFM |
| 50 m³/h | 29.4289 CFM |
| 100 m³/h | 58.8578 CFM |
| 150 m³/h | 88.2867 CFM |
| 200 m³/h | 117.716 CFM |
| 250 m³/h | 147.144 CFM |
| 300 m³/h | 176.573 CFM |
| 400 m³/h | 235.431 CFM |
| 500 m³/h | 294.289 CFM |
| 600 m³/h | 353.147 CFM |
| 700 m³/h | 412.004 CFM |
| 800 m³/h | 470.862 CFM |
| 900 m³/h | 529.72 CFM |
| 1,000 m³/h | 588.578 CFM |
| 1,200 m³/h | 706.293 CFM |
| 1,500 m³/h | 882.867 CFM |
| 2,000 m³/h | 1,177.16 CFM |
| 2,500 m³/h | 1,471.44 CFM |
| 3,000 m³/h | 1,765.73 CFM |
| 4,000 m³/h | 2,354.31 CFM |
| 5,000 m³/h | 2,942.89 CFM |
| 6,000 m³/h | 3,531.47 CFM |
| 8,000 m³/h | 4,708.62 CFM |
| 10,000 m³/h | 5,885.78 CFM |
| 15,000 m³/h | 8,828.67 CFM |
| 20,000 m³/h | 11,771.6 CFM |
| 30,000 m³/h | 17,657.3 CFM |
| 40,000 m³/h | 23,543.1 CFM |
| 50,000 m³/h | 29,428.9 CFM |
Fan, compressor and air handling unit data also come in cubic metres per minute (CMM), cubic metres per second, and litres per second or per minute. Multiply by these factors to get CFM:
| From | Multiply by |
|---|---|
| m³/h (CMH, m³/hr) | 0.588578 |
| m³/min (CMM) | 35.3147 |
| m³/s | 2,118.88 |
| L/s | 2.11888 |
| L/min | 0.0353147 |
Going the other way? Use the CFM to m³/h converter. To work out the airflow a duct carries from its size and air velocity, use the CFM calculator. For water, use the m³/h to GPM converter, and for any other pair the full flow rate converter.
Common questions about converting cubic metres per hour to cubic feet per minute.
Multiply the m³/h value by 0.588578. For example, 1,000 m³/h × 0.588578 = 588.578 CFM. The factor is 35.3147 cubic feet per cubic metre divided by 60 minutes per hour.
One cubic metre per hour is 0.588578 cubic feet per minute. For a quick estimate, divide m³/h by 1.7.
Yes. CMH, m³/h, m³/hr and m3/hr are all ways of writing cubic metres per hour, so 1 CMH is also 0.588578 CFM.
500 m³/h is 294.3 CFM. That is a typical extract rate for a domestic kitchen hood, which a US catalogue would list as roughly 300 CFM.
m³ on its own is a volume and CFM is a flow rate, so check the time base first. Per hour (m³/h or CMH), multiply by 0.588578. Per minute (m³/min or CMM), multiply by 35.3147, so 10 m³/min is 353.1 CFM. Per second, multiply by 2,118.88, so 1 m³/s is 2,118.9 CFM.
Divide by 3.6. 1,000 m³/h is 277.8 L/s. Both are metric; L/s is used in UK, Australian and many ISO ventilation standards and in duct velocity calculations.
Yes, when both figures are at the same reference conditions: SCFM converts to standard m³/h with the same 0.588578 factor. Nm³/h is usually referenced to 0 °C and SCFM to 60 °F or 68 °F, so going between those two needs a temperature correction as well.
Add this free calculator to your website. Copy the code below and paste it into your page.
Continue your analysis with these related engineering tools
© 2026 Flow Rate Calculator. All rights reserved. A Nomogram Works site.